Sony DSLR-A100 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Digital Camera
  5. DSLR-A100
  6. Service manual

Sony DSLR-A100 Service Manual

Digital single lens reflex camera
Hide thumbs Also See for DSLR-A100:
Table of Contents

Advertisement

Quick Links

See also: Installation Manual
SERVICE MANUAL
Ver 1.2 2006.07
Revision History
How to use
How to use
Acrobat Reader
Acrobat Reader
Revised-1
Link
Link
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.
DSLR-A100_L2
9-852-130-32
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
DIGITAL SINGLE LENS REFLEX CAMERA
Sony EMCS Co.
DSLR-A100
LEVEL
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Hong Kong Model
Chinese Model
Korea Model
Japanese Model
Tourist Model
Published by Kohda TEC
2
2006G0500-1
© 2006.7

Advertisement

Table of Contents
loading

Related Manuals for Sony DSLR-A100

Summary of Contents for Sony DSLR-A100

  • Page 1 0 are critical for safety. sécurité. Replace only with part num- Ne les remplacer que par une pièce ber specified. portant le numéro spécifié. DIGITAL SINGLE LENS REFLEX CAMERA 2006G0500-1 DSLR-A100_L2 © 2006.7 Sony EMCS Co. 9-852-130-32 Published by Kohda TEC...

  • Page 2: Specifications

    Camera with built-in flash and Exif Exif Ver. 2.21 +20 EV with Spot metering), interchangeable lenses USB communication (at ISO 100 with F1.4 lens) Lens All of Sony Lens Hi-Speed USB (USB 2.0 [Shutter] compliant) [CCD] Type Electronically-controlled, BC-VM10 Battery charger...

  • Page 3: Table Of Contents

    TABLE OF CONTENTS Section Title Page SERVICE NOTE 1-1. Chemicals ········································································ 1-1 1-2. Exterior Parts ··································································· 1-1 1-3. Unleaded Solder ······························································ 1-1 1-4. Safety Check-out ····························································· 1-1 1-5. Note for Replacing Fuse on the AM-001 Board ·············· 1-2 1-6. Demagnetization Method ················································ 1-2 DISASSEMBLY 2-1.

  • Page 4: Service Note

    CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY.

  • Page 5: Note For Replacing Fuse On The Am-001 Board

    1-5. NOTE FOR REPLACING FUSE ON THE AM-001 BOARD The caution label for fuse replacing on the AM-001 board is put under the DD-268 board. When replacing the fuse, remove the DD-268 board and refer to this label. 1-6. DEMAGNETIZATION METHOD It is easy to receive the influence of the outside magnetism because the slant sensor switch (S624) has the magnet in the inside.
  • Page 6 Tools to be prepared: Magnet (cover with a tape, etc. for damage prevention) Demagnetizer STEP 1: Push a magnet to the right side of MENU button to In the state shown below, operate the demagnetizer for 5 seconds, demagnetize. and with the demagnetizer operated, detach it in the arrow direction. At this time, hold the magnet in same position, and remove it after the demagnetizer was detached.
  • Page 7 2. DISASSEMBLY DISCHARGING OF THE MAIN CAPACITOR UNIT Before disassembly, be sure to discharge the main capacitor unit in the following manner. Short-circuit the capacitor using the discharger or a resistor of about 200-300Ω/3W. After discharge, check the voltage. SUBSIDIARY MATERIALS G: Grease B: Bond G-15 (J-6082-619-A)
  • Page 8 HELP HELP 2-1. DISASSEMBLY EXPLODED VIEW 2-1-1. OVERALL SECTION Follow the disassembly in the numerical order given. 1 LCD Holder Unit (1-1 to 1-22) 1-18 2 Top Cover Unit (2-1 to 2-11) 3 Eye Piece Frame Unit (3-1 to 3-2) 1-17 1-16 1-14...
  • Page 9 Battery Cover Unit Battery Cover Spring Slot Install it while charging with the hook of the spring. Fig. 1-1 Wires arrangement Red Connector Yellow Connector FPC Sticking Tape Fig. 1-2 Fig. 1-3 DSLR-A100_L2...
  • Page 10 Don’t tear. Solder 4 points Fig. 1-4 S Adjustment Screw S Adjustment Screw (Yaw adjust) B: B-50 (Pitch adjust) Fig. 1-5 DSLR-A100_L2...
  • Page 11 Claw Claw Claw Screwdriver This claw does not see from the outside. Fig. 1-6 CCD AO Adjustment Screw CCD AO Adjustment Screw B: B-50 B: B-50 Fig. 1-7 DSLR-A100_L2...
  • Page 12 2-1-2. HALF SET BODY-1 EXPLODED VIEW Follow the disassembly in the numerical order given. 1 FP-528 Flexible Board (1-1 to 1-22) 2 Power Unit (2-1 to 2-8) 3 AM-001 Board (3-1 to 3-25) (Fig. 2-2) 2 Power Unit 3-23 3-24 (Fig.
  • Page 13 Solder 2 points Solder 13 points Solder 6 points Solder 2 points Solder 10 points Fig. 2-1 Wires arrangement FPC Sticking Tape Top Cover Flexible Fixed Tpe I/O Flexible Lug Plate FN Plate Support Tpe FPC Sticking Tape Top Cover Flexible Fixed Tpe Fig.
  • Page 14 Wires arrangement Main Chassis Main PC Board Lug Plate AM-001 Board Fig. 2-4 Fig. 2-6 Flexible Board arrangement Don't tear. FPC Sticking Tape Black Wires arrangement Fig. 2-5 Fig. 2-7 DSLR-A100_L2...
  • Page 15 AM-001 Board Eject Lever Condition Wires arrangement FPC Sticking Tape Fig. 2-8 CCD Chassis Lug (1) PC Board Holding Shaft CCD Chassis Lug (2) Main PC Board Lug Plate Fig. 2-9 DSLR-A100_L2...
  • Page 16 2-1-3. HALF SET BODY-2 EXPLODED VIEW Follow the disassembly in the numerical order given. 1 Tripod Unit (1-1 to 1-15) 2 Battery Chamber Unit (2-1 to 2-14) 2-12 2-13 (Fig. 3-1) (Fig. 3-3) 2-14 2-11 2-10 (Fig. 3-3) 2 Battery Chamber Unit (Fig.
  • Page 17 Boss Solder 3 points Wires arrangement CCD Flexible Retainer Sheet Fig. 3-1 Fig. 3-2 Penta Protection Lug Plate (1) Penta Protection Lug Plate (2) Fig. 3-3 DSLR-A100_L2 2-11...
  • Page 18 2-1-4. HALF SET BODY-3 EXPLODED VIEW Follow the disassembly in the numerical order given. 1 CCD Unit (1-1 to 1-8) 1 CCD Unit HELP 2 Slider Unit (2-1 to 2-27) 3 Shutter Unit (3-1 to 3-3) (Fig. 4-1) 2-10 (See page 2-15) (Fig.
  • Page 19 CCD Connecting Mount PC Board Holding Table (A) Adhesive Tape Slider Stop Plate Fig. 4-1 Fig. 4-3 Ball Retainer Slider Tension (SP-C) Fig. 4-2 DSLR-A100_L2 2-13...
  • Page 20 2-1-5. SHUTTER UNIT INSTALLATION 1. Supply the power (2V, 1A) to the charge motor to rotate it forward so as to move up the mirror completely. Mirror DC Power Supply (2V, 1A) Charge Motor Fig. 5-1 2. Insert a screwdriver into a hole in the shutter charge gear, and hold it at 90 degree as shown in Fig. 4-5, and then install the Shutter Unit. Shutter Unit Screwdriver Shutter Charge Gera...
  • Page 21 2-1-6. CCD INCLINATION ADJUSTMENT/REPAIR Check 1. Use a copy stand, or place a mirror on the wall and adjust the accuracy so that the camera is opposed to its mirror image. 2. Use the AE master lens for inspection. 3. Obtain the tilt angle with the Photoshop, and perform as follows according to the angle: For the angle above +/–1.0 degree, be sure to repair.
  • Page 22 2-1-7. MIRROR BOX UNIT-1 EXPLODED VIEW Follow the disassembly in the numerical order given. 1 Penta Unit (1-1 to 1-2) 2 AF Module Unit (2-1 to 2-4) 1 Penta Unit (Fig. 7-1) 2 AF Module Unit (See page 2-18) (Fig. 7-2) DSLR-A100_L2 2-16...
  • Page 23 Claw Claw AF Module Flexible FixedTape Boss Claw Fig. 7-1 Boss Fig. 7-2 DSLR-A100_L2 2-17...
  • Page 24 2-1-8. AF MODULE UNIT INSTALLATION For the AF Module Unit, adjust the height by adjusting the extent of tightening of three hexagon socket head screws. Tighten the screws evenly when installing the AF Module Unit. The AF Module Unit is fixed with three hexagon socket head screws, washers, and springs.
  • Page 25 2-1-9. MIRROR BOX UNIT-2 EXPLODED VIEW Follow the disassembly in the numerical order given. 1 Iris Ring (1-1 to 1-16) 2 Aperture Unit (2-1 to 2-3) 3 AF Charge Unit (3-1 to 3-10) 1-15 1-14 2 Aperture Unit (Fig. 9-3) (See page 2-21 to 2-22) 1-13 1 Iris Ring...
  • Page 26 G: G-15 G: G-115 Fig. 9-1 Fig. 9-2 Solder 5 points Fig. 9-3 Coupler Lever Tention (SP) Coupler Lever Coupler Lever Shaft Fig. 9-4 DSLR-A100_L2 2-20...
  • Page 27 2-1-10. IRIS RING REMOVAL/INSTALLATION Removal Rotate the iris ring clockwise, and remove it at the stop position (iris-in end). (Fig. 10-1) At this time, do not rotate the iris joint gear of the Aperture Unit. Installation 1. With the Aperture Unit set in the charge position (see "2-1-12. Aperture Unit Charge Position Setting" ), install it on the front frame set. *The Aperture Unit has been set in the charge position, if it is not removed.
  • Page 28 2-1-13. APERTURE UNIT FREE POSITION SETTING 1. Set the Aperture Unit to a free position once, if the gear was rotated accidentally and the charge position is disordered, or if the charge position was shifted during disassembly. (Fig. 13-1, 13-2, 13-3) In a free state, a hole in the gear almost coincides with a hole in the Aperture Unit.
  • Page 29 2-1-14. AF CHARGE UNIT INSTALLATION 1. The lever must be in a free state when the AF Charge Unit is installed. (Fig. 14-1) Check the lever of the AF Charge Unit for position. If it protrudes outside, rotate the gear in the arrow direction. Gear When the lever becomes a free state, it will retract as shown.
  • Page 30 2-1-15. MIRROR BOX UNIT-3 EXPLODED VIEW Follow the disassembly in the numerical order given. 1 Main Mirror Holder Unit (1-1 to 1-23) 2 Front Frame Unit (2-1 to 2-3) 1-23 1-22 1 Main Mirror Holder Unit (Fig. 15-5) 1-21 1-10 1-20 (Fig.
  • Page 31 Sub Mirror Function (SP) Solder 2 points Fig. 15-1 Fig. 15-2 Main Mirror Driving Lever Mirror Driving (SP) Mirror Over Charge (SP) Mirror Driving Lever Fig. 15-3 DSLR-A100_L2 2-25...
  • Page 32 Dot mark at under main mirror. Painting area. B: B-50 (After installation, allow to dry for 8 - 12 hours) Fig. 15-4 Boss Boss Main Mirror Holder Unit Sub Mirror Holder Unit Fig. 15-5 Sub Mirror (SP) Cushion (A) Fig. 15-6 DSLR-A100_L2 2-26...

  • Page 33: Battery Chamber

    2-1-16. BATTERY CHAMBER/LCD HOLDER BLOCK EXPLODED VIEW Follow the disassembly in the numerical order given. 1 Battery Chamber (1-1 to 1-25) 2 LCD Holder (2-1 to 2-9) 1-24 (Fig. 16-5) (Fig. 16-3) 1-19 1-22 1-20 1-18 1-21 (Fig. 16-4) 1-23 1-11 1-12 (Fig.
  • Page 34 Battery Lock Claw Tention (SP) Claw Claw Power Plate (GND) Fig. 16-1 Fig. 16-2 Claw Battery Spring Terminal Board Holder Fig. 16-3 Fig. 16-4 Spring hooking insert into body groove. Fig. 16-5 DSLR-A100_L2 2-28...
  • Page 35 Claw Preview Button FPC Fixed Tape FP-529 Flexible Board LCD GND Plate Claw Fig. 16-6 Fig. 16-8 Boss Solder 2 points Fig. 16-7 FP-529 Flexible Board Fig. 16-9 DSLR-A100_L2 2-29...
  • Page 36 2-1-17. TOP COVER BLOCK EXPLODED VIEW Follow the disassembly in the numerical order given. 1 Top Cover Base Plate Unit (1-1 to 1-19 (1-5 to 11, 1- 15 to 19 next page)) 2 Top Cover (2-1 to 2-45 (2-8 to 12, 2-20 to 23, 2-28 to 30 next page)) 2-32 2-31...
  • Page 37 EXPLODED VIEW 1 Top Cover Base Plate Unit (Fig. 17-4) 1-19 1-17 (Fig. 17-1) 1-16 1-18 (Fig. 17-2) 1-11 (Fig. 17-3) 2-30 2-22 2-28 2-20 2-29 2-21 1-15 2-10 2-11 (Fig. 17-6) 2-23 2 Top Cover 2-12 (Fig. 17-6) 1-10 DSLR-A100_L2 2-31...
  • Page 38 Rotation Axis PU Detect Contact Solder 4 points Claw Boss Fig. 17-2 Solder 5 points Fig. 17-1 Fig. 17-3 Double Side Tape Double Side Tape Double Side Tape Double Side Tape Double Side Tape Fig. 17-4 DSLR-A100_L2 2-32...
  • Page 39 G: G-85 G: G-85 Fig. 17-5 Release Button Cap B: B-20 G: G-115 Release Button Main SW Knob G: G-115 G: G-85 Installation position Release Button Cap Release Button Main SW Knob Click Plate LOCK - NG LOCK - OK Fig.
  • Page 40 B: B-60 – Bottom Side – B: B-60 – Top Side – Fig. 17-8 Shaft (L) Retainer Plate G: G-15 G: G-15 B: B-60 Shaft (R) Retainer Plate F Snap Action (SP) Rotary Shaft (L) Fig. 17-9 Fig. 17-10 DSLR-A100_L2 2-34...

  • Page 41: Front Cover

    2-1-18. FRONT/REAR COVER BLOCK EXPLODED VIEW Follow the disassembly in the numerical order given. 1 Front Cover (1-1 to 1-13) 2 Rear Cover (2-1 to 2-5) 1 Front Cover 1-10 1-12 (Fig.18-3) 1-11 (Fig.18-2) (Fig.18-1) 1-13 (Fig.18-3) 2 Rear Cover (Fig.18-4) (Fig.18-4) DSLR-A100_L2...
  • Page 42 G: G-115 G: G-15 AF/M Swlection Knob LL Cover Tape Fig. 18-3 Side View Fig. 18-1 Anti Shake (SW) Knob G: G-115 G: G-15 PV Button Attach Tape Fig. 18-2 Fig. 18-4 DSLR-A100_L2 2-36E...
  • Page 43 HELP Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown. If the camera is started with the exterior removed - Solder the "a" part of FP-528 Flexible Board to short-circuit. - The FP-528 Flexible Board is short-circuited at the "b" part when it was replaced. *Before installing the Top Cover Block, be sure to unsolder the "a"...
  • Page 44 Cleaning procedure of OLPF <Preparation> Make it to CCD Cleaning Mode of Power On/Set Up Mode by using the AC power supply. (It comes to Mirror Up/Shutter Open) Note: Use the AC power supply absolutely. <Cleaning Method> 1. Soak a small amount of EE3310 (Liquid cleaner) after wrapping the cleaning cloth (J-6082-636-A) around the cleaning jig (J-6082-635-A).

  • Page 45: Block Diagrams

    3. BLOCK DIAGRAMS Link Link OVERALL BLOCK DIAGRAM (1/4) POWER BLOCK DIAGRAM (1/3) OVERALL BLOCK DIAGRAM (2/4) POWER BLOCK DIAGRAM (2/3) OVERALL BLOCK DIAGRAM (3/4) POWER BLOCK DIAGRAM (3/3) OVERALL BLOCK DIAGRAM (4/4) DSLR-A100_L2...
  • Page 46 3. BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM (1/4) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. IS-001 BOARD CN001 : VIDEO SIGNAL M4, C4, L4, IC013 CCDOUT_1-BUFF D4, K4, E4, (SHUTTER) CCDD_A0 - CCDD_A11 BUFFER...
  • Page 47 3-2. OVERALL BLOCK DIAGRAM (2/4) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. AM-001 BOARD (2/4) FP-554 FLEXIBLE BOARD CN105 CN104 CN107 TRC_P Pin_P W11, AE11, W12, C2, B1, TRC_Y Pin_Y AD12, AF12, AC12,...
  • Page 48 3-3. OVERALL BLOCK DIAGRAM (3/4) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. FP-528 FLEXIBLE BOARD FP-557 FLEXIBLE BOARD AM-001 BOARD (3/4) CN301 IC313 LMOUT_LPF LMOUT LMOUT LOW-PASS DSOUT FILTER LMCK...
  • Page 49 3-4. OVERALL BLOCK DIAGRAM (4/4) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. REFLECTIONS UNIT AM-001 BOARD (4/4) ST-155 BOARD C657 T151 CHARGING CN602 CAPACITOR XE651 FP-562 FLEXIBLE BOARD FP-550 FLEXIBLE BOARD FLASH Q312...
  • Page 50 3-5. POWER BLOCK DIAGRAM (1/3) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. DD-268 BOARD CN701 BH9001 BAT_C BATTERY SDCJX TERMINAL Q701, 704 - 706 CN704 BAT_+ B+ SWITCH, CHARGE SWITCH BAT_C IC201...
  • Page 51 3-6. POWER BLOCK DIAGRAM (2/3) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. AM-001 BOARD (1/2) DETX DETX FRESET POWER (3/3) (PAGE 3-7) CN101 Q309 FULL FULL FULL 46 BATRxD BAT_C BAT_C...
  • Page 52 3-7. POWER BLOCK DIAGRAM (3/3) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. AM-001 BOARD (2/2) IS-001 BOARD IC002 IC005 IC006 FP-526 2ch AFE H DRIVER BUFFER FLEXIBLE (3/3) (1/3) (1/3)
  • Page 53 4. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 4-1. FRAME SCHEMATIC DIAGRAM LENS BRACKET TERMINAL FP-561 FLEXIBLE BOARD FP-567 FLEXIBLE BZ9001 BUZZER IS-001 BOARD FP-526 FLEXIBLE BOARD SHUTTER BOARD FP-550 FLEXIBLE BOARD UNIT FP-565 FLEXIBLE BOARD (Dilect (Dilect Solder) Solder) (Dilect Solder) (Dilect Solder) (Dilect Solder) (Dilect Solder)

  • Page 54: Schematic Diagrams

    4-2. SCHEMATIC DIAGRAMS Link Link FP-558 FLEXIBLE BOARD, IS-001 BOARD (1/3) (CCD IMAGER) BL-005 BOARD (FINDER) IS-001 BOARD (2/3) (TIMING GENERATOR) ST-155 BOARD (FLASH DRIVE) IS-001 BOARD (3/3) (AFE) FP-528, FP-567 FLEXIBLE BOARD (I/O) DD-268 BOARD (1/2) (DC IN) FP-557 FLEXIBLE BOARD (PHOTOMETRY) FP-565 FLEXIBLE BOARD, DD-268 BOARD (2/2) (DC/DC CONVERTER) EP-002 BOARD (EYE DETECT)
  • Page 55 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS (In addition to this, the necessary note is printed in each block) (For schematic diagrams) Precautions for Replacement of Imager • All capacitors are in µF unless otherwise noted. pF : µ •...
  • Page 56 IS-001 BOARD (1/3) Note:IS-001 board and all mounted parts on this board are not supplied, but they and FP-526 flexible board are included CCD IMAGER in the CCD unit. @001 XX MARK:NO MOUNT CCD_H15 (2/3) R076 R078 R075 R077 220k 220k (3/3) 1/16W...
  • Page 57 IS-001 BOARD (2/3) Note:IS-001 board and all mounted parts on this board are not supplied,but they and FP-526 flexible board are included TIMING GENERATOR in the CCD unit. XX MARK:NO MOUNT TP005 @017 TP008 CSTGX @019 (3/3) AD_D3 C008 C009 C001 C002 C004...
  • Page 58 IS-001 BOARD (3/3) Note:IS-001 board and all mounted parts on this board are not supplied,but they and FP-526 flexible board are included in the CCD unit. XX MARK:NO MOUNT R061 @001 (1/3) CCD_H15 (2/3) R065 @009 (2/3) VSUB_H15 C010 C011 C012 C022 C021...
  • Page 59 Schematic diagrams of the AM-001 board is not shown. Pages from 4-8 to 4-12 are not shown. DSLR-A100_L2...
  • Page 60 • Refer to page 4-3 for mark 0. DD-268 BOARD (1/2) Note: All mounted parts are not supplied, but they are included in the DD-268 @301 (2/2) complete board. DC IN Q701, 704 – 706 AM-001 B+ SWITCH, (5/5) CHARGE SWITCH CN102 Through the BH9001...
  • Page 61 • Refer to page 4-3 for mark 0. DD-268 BOARD (2/2) DC/DC CONVERTER SWITCHING F707 @301 IC201 (1/2) 3.3V REG Q202, Q204 (1/2) SWITCHING Note: All mounted parts are not supplied, but they are included in the DD-268 complete board. Q203, Q204 (2/2) IC501 SWITCHING...
  • Page 62 FP-556 FLEXIBLE BOARD FP-556 flexible board is replaced as block, so that PRINTED WIRING BOARD is omitted. AF CCD TN913 TN913 MOD4 NC2 TN915 TN915 VOUT TN912 TN912 VOUT VOUT VOUT TN911 TN911 VCC1 TN910 TN910 VCC1 VCC1 VREF AM-001 TN909 TN909 IC604...
  • Page 63 FP-554 FLEXIBLE BOARD IC603 ±1% R731 R731 1k x4 HALL ELEMENT, ACTUATOR HALL ELEMENT FP-554 flexible board is replaced as block, so that PRINTED WIRING BOARD is omitted. VBRA5a TN921 TN921 VBRA5a VBRA5a IC603 IC603 HQ-8220 HQ-8220 Pout1p TN922 TN922 Pout1p Pout1p Pout2n...
  • Page 64 FP-560 FLEXIBLE BOARD FP-552 FLEXIBLE BOARD AF/MF SWITCH CHARGE CAM FP-560 flexible board is replaced as block, FP-552 flexible board is replaced as block, so that PRINTED WIRING BOARD is omitted. so that PRINTED WIRING BOARD is omitted. TN1121 SCAM1 TN1191 TN1101 TN1101...
  • Page 65 • Refer to page 4-3 for mark 0. ST-155 BOARD ST-155 board and all mounted parts on this board are not supplied, but they are included REFLECTIONS UNIT in the "CAPACITOR UNIT, MAIN". FLASH DRIVE XE651 CN602 D652 D652 1SR154-400 1SR154-400 T151 D651...
  • Page 66 FP-528 FLEXIBLE BOARD FP-528 flexible board is replaced as block, so that PRINTED WIRING BOARD is omitted. LVPC TN601 TN601 LVPCx TN602 TN602 VDD1 VDD1 VDD1 VDD1 VDD1 TN641 TN641 TN603 TN603 LMCK LMCK LMCK TN642 TN642 TN604 TN604 LMODE LMODE TN643 TN643...
  • Page 67 FP-557 FLEXIBLE BOARD FP-525 FLEXIBLE BOARD FP-557 flexible board is replaced as block, so that PRINTED WIRING BOARD is omitted. PHOTOMETRY FP-525 flexible board is replaced as block, LENS RELEASE DETECT so that PRINTED WIRING BOARD is omitted. R612 0 R612 0 FP-528 TN821...
  • Page 68 FP-550 FLEXIBLE BOARD FP-550 flexible board is replaced as block, so that PRINTED WIRING BOARD is omitted. TOP COVER SWITCH SFLDx TN725 TN725 SFLDx SFLDx TN724 TN724 TN741 TN741 FP-562 TN723 TN723 TN742 TN742 FLEXIBLE DGND_F TN722 TN722 DGND_F DGND_F TN743 TN743 TN1071-TN1076...
  • Page 69 FP-561 FLEXIBLE BOARD FP-562 FLEXIBLE BOARD FP-562 flexible board is replaced as block, FRONT DIAL FP-561 flexible board is replaced as block, so that PRINTED WIRING BOARD is omitted. so that PRINTED WIRING BOARD is omitted. HOT SHOE HOT SHOE LD306 TN1079 TN1079...

  • Page 70: Printed Wiring Boards

    4-3. PRINTED WIRING BOARDS Link Link IS-001 BOARD DD-268 BOARD COMMON NOTE FOR PRINTED WIRING BOARDS DSLR-A100_L2...
  • Page 71 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS • : Uses unleaded solder. • Chip parts. • : Circuit board Transistor Diode : Flexible board Pattern from the side which enables seeing. : pattern of the rear side (The other layers’...
  • Page 72 IS-001 (6 layers) : Uses unleaded solder. IS-001 BOARD Note: IS-001 board and all mounted parts are not supplied, but they are included in the CCD unit. IC001 C073 R066 Q006 C072 C063 C006 C060 C012 C014 TP017 C024 R061 TP021 TP016 C005...
  • Page 73 Printed wiring board of the AM-001 board is not shown. Pages 4-26 and 4-27 are not shown. DSLR-A100_L2...
  • Page 74 DD-268 (6 layers) : Uses unleaded solder. DD-268 BOARD (SIDE A) DD-268 BOARD (SIDE B) (ACCESS) (CENTER) SUPER STANDBYSHOT 1-871-186- 1-871-186- Note: All mounted parts are not supplied, but they are included in the DD-268 complete board. DSLR-A100_L2 DD-268 4-28...
  • Page 75 Mounted parts location of the AM-001 board is not shown. Page 4-29 is not shown. DSLR-A100_L2 4-29...

  • Page 76: Repair Parts List

    NOTE NOTE 5. REPAIR PARTS LIST ACCESSORIES EXPLODED VIEWS ACCESSORIES EXPLODED VIEWS Link Link OVERALL SECTION HALF SET BODY-1 HALF SET BODY-2 HALF SET BODY-3 BATTERY CHAMBER/ MIRROR BOX UNIT-2 MIRROR BOX UNIT-3 MIRROR BOX UNIT-1 LCD HOLDER BLOCK FRONT/REAR TOP COVER BLOCK-2 TOP COVER BLOCK-1 COVER BLOCK...
  • Page 77 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST NOTE: • -XX, -X mean standardized parts, so they may have some differences from When indicating parts by reference number, the original one. please include the board name. •...

  • Page 78: Exploded Views

    5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY 5-1. EXPLODED VIEWS 5-1-1. OVERALL ASSEMBLY Rear Cover Block (See Page 5-22) ns: not supplied (BLACK) (SILVER) (BLACK) (BLACK) (SILVER) (SILVER) Top Cover Block (See Page 5-18, 20) (BLACK) (SILVER) (BLACK) (SILVER) (BLACK) (SILVER)
  • Page 79 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY Ref. No. Part No. Description Ref. No. Part No. Description A-1196-101-A FRAME UNIT, EYE PIECE 2-695-425-01 SCREW (M1.6) (Black) 2-688-194-01 COVER, L DECORATION (BLACK) 2-695-424-01 SCREW (M1.6) (Silver) 2-688-194-11 COVER, L DECORATION (SILVER) 2-695-430-21 SCREW (T1.7), HEAD PAN TAPPING (Black) 2-688-186-01 LID, DC JACK (BLACK) 2-695-431-11 SCREW (T1.7), HEAD PAN TAPPING (Silver)
  • Page 80 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY 5-1-2. HALF SET BODY-1 BT101 - 0 0 CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Half Set Body-2 : BT101 (BATTERY, LITHIUM SECONDARY) (See Page 5-6) Board on the mount position.
  • Page 81 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY Refer to page 5-1 for mark 0. • Ref. No. Part No. Description Ref. No. Part No. Description 2-693-423-01 SHAFT, PC BOARD HOLDING 1-964-901-11 HARNESS (BL-001) 2-688-796-01 LUG (1), CCD CHASSIS 2-688-372-01 PLATE, I/O FLEXIBLE LUG 2-689-186-01 TABLE (B), PC BOARD HOLDING 2-688-373-01 SHEET1 (S), HEAT TRANSMISSION...
  • Page 82 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY 5-1-3. HALF SET BODY-2 Battery Chamber Block (See Page 5-16) J9001 Half Set Body-3 (See Page 5-8) DSLR-A100_L2...
  • Page 83 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY Ref. No. Part No. Description Ref. No. Part No. Description 2-689-389-01 PLATE (1), PENTA PROTECTION LUG 2-695-423-31 SCREW (M1.6) (Silver) 2-688-681-01 CHASSIS (L), SUB 2-695-427-01 SCREW (M2) (Silver) 2-688-854-01 PLATE (2), PENTA PROTECTION LUG 2-695-421-01 SCREW (M2), +P1 MAIN PAN (Silver) 2-688-200-01 PLATE, EYELET REINFORCEMENT 2-695-421-11 SCREW (M2), +P1 MAIN PAN (Silver)
  • Page 84 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY 5-1-4. HALF SET BODY-3 Note: Refer to HELP for the method of cleaning the OLPF. (Note) Mirror Box Unit-1 (See Page 5-10) DSLR-A100_L2...
  • Page 85 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY Ref. No. Part No. Description Ref. No. Part No. Description 2-689-182-01 GEAR, SHUTTER CHARGE 2-689-073-01 RETAINER, BALL 2-689-185-01 TABLE (A), PC BOARD HOLDING 2-693-345-01 SHUTTER 2-695-356-01 BALL, BEARING 2-689-330-01 STOPPER, ECCENTRIC PIN 2-689-357-01 INSULATING SHEET, ANTI SHAKE 2-695-354-01 WASHER A-1196-100-A SLIDER UNIT...
  • Page 86 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY 5-1-5. MIRROR BOX UNIT-1 ns: not supplied Mirror Box Unit-2 (See Page 5-12) 203-206 DSLR-A100_L2 5-10...
  • Page 87 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY Ref. No. Part No. Description Ref. No. Part No. Description A-1196-094-A BOX UNIT, MIRROR 2-689-362-01 TAPE, AF MODULE FLEXIBLE FIXED A-1196-099-A PENTA UNIT 2-689-369-01 SPACER (A), VB 2-688-865-01 WASHER, S ADJUSTMENT 2-689-370-01 SPACER (B), VB 2-693-420-01 SP, S ADJUSTMENT 2-689-371-01 SPACER (C), VB...
  • Page 88 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY 5-1-6. MIRROR BOX UNIT-2 Mirror Box Unit-3 (See Page 5-14) 257 256 DSLR-A100_L2 5-12...
  • Page 89 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY Ref. No. Part No. Description Ref. No. Part No. Description 2-689-198-01 RING (SP) A-1196-097-A APERTURE UNIT 2-688-792-01 SPACER, MOUNT 2-693-421-01 PIN, LENS LOCK 2-689-301-01 PLATE (2), MOUNT LUG 2-688-679-01 BUTTON, LENS LOCK A-1196-096-A CHANGE UNIT, AF 2-693-419-01 LOCK (SP), LENS 2-689-021-01 MOUNT (TOP), H...
  • Page 90 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY 5-1-7. MIRROR BOX UNIT-3 ns: not supplied DSLR-A100_L2 5-14...
  • Page 91 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY Ref. No. Part No. Description Ref. No. Part No. Description 2-689-292-01 DETECT CONTACT (A), SLLK 2-693-430-01 DRIVING (SP), MIRROR 2-689-008-01 SPACER, SLLK DETECT CONTACT 2-689-404-01 RETAINER, MAIN MIRROR HOLDER 2-689-293-01 DETECT CONTACT (B), SLLK 1-870-959-11 FP-525 BOARD A-1196-095-A HOLDER UNIT, MAIN MIRROR 2-689-294-01 PLATE, LENS LOCK BUTTON HOLDING...
  • Page 92 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY 5-1-8. BATTERY CHAMBER/LCD HOLDER BLOCK BH9001 LCD9001 BL9001 DSLR-A100_L2 5-16...
  • Page 93 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY Refer to page 5-1 for mark 0. • Ref. No. Part No. Description Ref. No. Part No. Description 2-688-132-01 PLATE, LCD GND A-1196-115-A COVER UNIT, CF CARD (BLACK) 2-689-360-01 TAPE, PREVIEW BUTTON FCP FIXED 1-870-963-11 FP-529 FLEXIBLE BOARD A-1196-116-A COVER UNIT, CF CARD (SILVER) 2-688-291-01 WINDOW, LCD...
  • Page 94 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY 5-1-9. TOP COVER BLOCK-1 DSLR-A100_L2 5-18...
  • Page 95 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY Refer to page 5-1 for mark 0. • Ref. No. Part No. Description Ref. No. Part No. Description A-1196-102-A COVER UNIT, UPPER (BLACK) 2-695-356-11 BALL, BEARING A-1196-103-A COVER UNIT, UPPER (SILVER) 2-688-118-01 PLATE, MODE DIAL CLICK 2-687-032-01 CASE, FLASH BOTTOM 2-688-284-01 INSULATING SHEET, MODE DIAL...
  • Page 96 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY 5-1-10. TOP COVER BLOCK-2 ns: not supplied DSLR-A100_L2 5-20...
  • Page 97 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY Ref. No. Part No. Description Ref. No. Part No. Description 2-688-777-01 PLATE (E), TOP ELECTROSTATIC 2-689-191-01 DETECT CONTACT, MAIN SW KNOB 2-688-676-01 COVER, RELEASE (BLACK) A-1196-113-A PLATE UNIT, UPPER COVER BASE 2-688-676-11 COVER, RELEASE (SILVER) 2-688-119-01 BUTTON, AEL+/–...
  • Page 98 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY 5-1-11. FRONT/REAR COVER BLOCK DSLR-A100_L2 5-22...
  • Page 99 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY Ref. No. Part No. Description Ref. No. Part No. Description A-1196-104-A COVER UNIT, FRONT (BLACK) 2-693-334-01 TAPE (C), RUBBERGRIP DOUBLE SIDE A-1196-105-A COVER UNIT, FRONT (SILVER) 2-689-193-01 DETECT CONTACT, AF/M CHANGE 2-688-197-01 TAPE (B), RUBBERGRIP DOUBLE SIDE 2-688-295-01 INSULATING SHEET, AF/M A-1196-108-A COVER UNIT, REAR (BLACK)
  • Page 100 Electrical parts list of the AM-001 board is not shown. Page 5-24 to 5-28 are not shown. DSLR-A100_L2...

  • Page 101: Checking Supplied Accessories

    Ver 1.2 2006.07 Checking supplied accessories. Other accessories 2-681-186-01 INSTRUCTION (Read This First) (JAPANESE) (J) 2-681-186-11 INSTRUCTION (Read This First) (ENGLISH) (EXCEPT CH, KR, J) Battery Charger Power Cord 2-681-186-21 INSTRUCTION (Read This First) (FRENCH, ITALIAN) 0 1-555-074-71 (AUS) (BC-VM10) (CND, AEP) 0 1-479-742-21 0 1-782-476-41 (CH)
  • Page 102 [Description of main button functions on toolbar of the Adobe Acrobat Reader Ver5.0 (for Windows)] Toolbar Printing a text Reversing the screens displayed once • To reverse the previous screens (operation) one by one, click 1. Click the Print button 2.

  • Page 103: Revision History

    Reverse 985213033.pdf Revision History S.M. Rev. Ver. Date History Contents issued 2006.06 Official Release — — 2006.06 Revised-1 • Link from disassembly with to detailed charts 2006.07 Correction-1 • Correction of Repair Parts (C1) S.M. correction: Page 5-29 DSLR-A100_L2...

Table of Contents