此商品  NexStar SX, USB 3.2 Gen 2x1 Type C M.2 NVMe/SATA SSD Dock (NST-D209C3-BK) |  |  |  |  |  | |
| 價格 | US$39.99 | US$51.99 | US$35.99 | -24% US$15.19 定價: US$19.99 | US$16.99 | -10% US$40.63 定價: US$45.00 |
| 送貨 | 取得 5月 9 - 13 | 取得 5月 9 - 13 | 最快於 星期六, 5月 11 取得 | 最快於 星期六, 5月 11 取得 | 最快於 星期六, 5月 11 取得 | 最快於 星期六, 5月 11 取得 |
| 客戶評價 | ||||||
| 輕鬆安裝 | ||||||
| 易於識別 | ||||||
| 物有所值 | ||||||
| 技術支援 | ||||||
| 簡單好用 | ||||||
| 銷售方： | VantecUSA | VantecUSA | GMM Direct | ORICO Direct US Store | VcomDirect US | Amazon.com |
Features:
Description:
The USB 3.2 Gen 2x1 Type C M.2 NVMe/SATA SSD Dock is a new addition to the NexStar SX Series. This Dock unique function allows you to use two types of M.2 module. You can use M.2 NVMe or M.2 SATA Module even when both are using a very different protocol. This flexibility removes the worry of putting the wrong module or having to purchase two enclosures just for two different types of modules. To swap the module is easy, just pull back the quick lock/unlock Rubber Mount and easily swap the module. If you are using a smaller M.2 (80/60/42mm) size, it is easy to change the Rubber Mount. The width of the dock is wide; you can mount any heatsink mounted M.2 with a width of 26mm. The power button allows for easy disconnection from the system for hot-swapping of the module without unplugging the USB cable. For the need for ultra-fast speed and mix M.2 modules, this dock is equipped with a USB 3.2 Gen 2x1 Bridge controller for 10Gbps (theoretical speed) to get it done.
About HeatSink:
ICEBERQ M.2 NVMe/SSD Heat Sink With Thermal Pad
The Vantec ICEBERQ M.2 NVMe/SSD Heat Sink with Thermal Pad keeps your M.2 NVME/SSD cool near ambient temperatures by dissipating and protecting your M.2 module from heat. This High Vented Fins Heat Sink is easy to install on any standard M.2 2280 size module. It will help to extend your M.2 lifespan with a less likely chance of suffering from overheating failure. It keeps your M.2 Module within normal operating temperature to ensure it performs at peak performance during intense data usage. This Heat Sink is designed for Single or Double Sided M.2 NVMe/SSD and uses Dual Thermal Pads with rubber spacer to Dampen Vibration and provides full contact on both sides. The Thumb Secure Mount is easy to secure, heat dissipating, and sturdy. The Flat Base Heat Sink makes full contact with your M.2 Module for maximum heat dissipation for your whole module and it is available in Black, Red, and Blue Color Heat Sink.
|
|
|
|
|
|---|---|---|---|
Easy to change M.2 sizeNote the length of your M.2 Module. This Dock will fit M.2 Module of size 2280, 2260, and 2242 in length. Adjust the Rubber Locking Mount to the right position for the length of your M.2 module by inserting it into the Rubber Mounting Hole and slide to lock the Rubber Locking Mount in place. |
Easy to connect USB C cableConnect one end of the USB cable to the Dock and the other end to your system USB C port. Your Dock is ready to use. |
Easy to insert and secureInsert your M.2 Module securely into the M.2 interface at an angle and push down while push the Rubber Locking Mount away slightly to let the M.2 module lock in place. |
Easy to Power ON and usePush the power ON/OFF button and the LED will show in white. Your system will show this USB connected device. To swap or remove the M.2 module, please push the power button and make sure the device is in power OFF state (LED shows RED) before pushing the Rubber Locking Mount to the right to release and remove the M.2 module. |
